2008 toyota tundra maintenance required light

2008 toyota tundra maintenance required light

      Comment   

Push and hold the reset button for the trip meters. If the light was not reset during the oil change would it go 9k miles before it.


1000 Ideas About 2008 Toyota Tundra On Pinterest Toyota Tundra 2011 Ford F150 And 2014 Toyota Tundra Toyota Tundra Toyota Tundra Trd Toyota Tundra Lifted

It will blink until all the dashes are gone then it will show 000000.

. Required will display on your odometer instrument cluster. Make sure the Trip A is reading on the odometer. While holding down the odometer button turn the key to the on position.

Press The ODOTRIP BUTTON To Display To TRIP A. Up to 8 cash back Step 1. Visit a Toyota Service Center Today.

Press and hold the Trip or Reset button. The Toyota Tundra has a built-in maintenance reminder. I hope this post has helped you reset the oil light on your Toyota Tundra.

The maintenance light on a Toyota Tundra is represented by the Main. Toyota Maintenance Required Light. Discussion Starter 1 Jan 28 2011.

These intervals happen at mileage or time intervals typically every 5000 miles6 months. Not much on the 5K check - Fluid Levels - check brakes - Rotate tires - etc. It will count down ----- ---- --- - - -.

Turn your ignition off and hold down the Trip Meter Reset button. When its time for an oil change the symbol Main. Maintenance Required Light Meaning The maint reqd light is a reminder that Toyota recommends.

While continuing to depress the reset button turn the key back to the on position but not so far as the start position. Then you will see zeros on the odometer display 000000. Turn ignition to off position.

Do not start the engine. Will start blinking at start up at 4500 miles and then stay on after 5000 miles. The Toyota Tundras maint reqd light indicates a service interval has been met.

Turn the key to the on position. This will reset the maintenance light on your dash. As a result you can drive safely on roads and after 5000 miles this light will automatically remind you its time for a new oil change so you dont have to count the miles manually.

Either Trip A or Odometer I think Trip A turn your car off and hold the button in. Turn The Ignition ON. Image for reference only.

I am have a hard time re-setting the Maintenance Required Indicator Light I followed all steps that are listed in the Owner Manual and still cant clear. SAVE MONEY and buy Motor Oils and Car Parts online - FREE SHIPPING. Required Light on a Toyota Tundra.

The maintenance required light maint reqd indicates that factory service interval has been met. This occurs 4500 miles after the last reset. Blinks 8 times then stops.

Ensure your odometer reads total miles not trip A or trip B 2. Resetting the maintenance light is in your owners manual but its easy. While holding down the trip meter reset knob turn the ignition to.

Insert the key into the ignition and turn the car to the ON position. When it starts to blink it means that your truck requires an oil change. You can find it in your Odometer Instrument Cluster.

Dont Start The Engine. The oil was changed at the dealer about 4k miles ago. The maintenance required light is standard in all newer Toyota vehicles and helps insure long life and dependability by making sure factory maintenance intervals are met.

If it is not depress the Trip or Reset button until the odometer reads Trip A. Turn your ignition to the on position. These intervals happen at different mileage or time intervals typically 5000 miles6 months.

In this thread in this sub-forum in the entire site. The maintenance required light will come on briefly and flash when you first start the truck. What Does Maintenance Light Mean on Toyota Tundra.

Rckwll asked a 2001 Toyota Tundra Maintenance Repair question 2 months ago. 2009-2020 Toyota Tundra Maintenance Required Reset STEP 1. At 5000 miles after reset it will come on and stay on.

Press and hold the Trip button. Looked up in manual. CarGurusfrustrated2000tundra asked a 2000 Toyota Tundra 2 Dr SR5 V8 4WD Standard Cab LB Maintenance.

Once you see your regular odometer readings return to your display release the button. 2008 Toyota Tundra wont Start. After youve changed the oil you can reset the light yourself it will not return until the next scheduled oil change.

RECOMMENDED BY THE PEOPLES GARAGEhttpamznto1ck3B2wHow to Reset the Maintenance Req. You can now release the odometer button. GAMPRO 12V 150db Air Horn 18es Chrome Zinc Single Trumpet Truck Air Horn with Compressor for Any 12V Vehicles Trucks Lorrys Trains Boats Cars Black 3490.

Either way heres the process to reset the maintenance light on a 2008 Toyota Tundra. 2008 Toyota Tundra SR5 57L 4X4 DC Silver Sky Metallica SIG SAUER 229 Equinox 40 IBTO NRA Member. This light is standard in all newer Toyota Scion and Lexus vehicles.

2002 Toyota Tundra Turns Over But Will Not Start. Only show this user. You will see -----on the odometer display.

Kevork DjansezianGetty Images NewsGetty Images. Do not go as far as to start the engine. Turn the key back off.

Release the Trip button until the trip meter is set to all zeros. My 2000 tundrasr5 47l 4x4 wont start. The wife has the truck at work but said today the Maint light blinks for about 5 seconds after she starts the truck.

Dasen Low Profile LED Light Hood Ditch Mount Brackets Compatible with 2009-2021 Toyota 4Runner 2007-2021 Tundra. It would be best to note this light is easily mistaken for the check engine light. Determine that the odometer reading is displayed.

It has right at 9k miles on it. Without releasing the button turn your ignition on again. Maintenance Required Light just started blinking at start up.

Secondly resetting the maintenance required light after you have changed the oil restarts the counter. Continue to hold the Trip button while switching the ignition to On without starting the engine. Turn the vehicle completely off.

Ensure odometer reading is shown. Here is a quick video on how to reset the maintenance light on your 2008 toyota tundramaintenancelight toyota tundra. 2008 TOYOTA Tundra Maintenance Light Reset Instructions.

Turn the key to the on position and watch as your odometer reads -----. Turn the ignition to run one position before starting engine. Guess its time to schedule the 1st trip to the service department.